The Z3S™ Siren’s intuitive design efficiently integrates the unit’s emergency warning systems. The controller has three distinct zones: sirens and primary lighting, auxiliary devices and traffic or warning function. Adjust backlight brightness and public address microphone to accommodate various light and noise conditions. Additional features include a built-in battery voltage check, sleep mode timer and configurable buttons to control auxiliary or siren functions via Matrix® software.
Backlit brightness is officer adjustable just like the dashboard dimmer switch giving drivers the appropriate lighting for their eyes
- Different size and shape buttons are located quickly allowing you to operate all the light and siren functions without taking your eyes off the road
- Backlight brightness is officer adjustable giving you the appropriate lighting for your eyes
- PA Microphone is officer adjustable to meet varying noise conditions
- Easy to operate with three distinct zones: sirens and primary lighting (red), auxiliary lighting and other equipment (blue),and traffic or warning function (yellow)
- Public address (PA) stuck mic sensor automatically returns the siren to normal function should the microphone switch get stuck in PA mode and microphone volume is adjustable
- Built in “battery voltage check” sensor shuts down lights, and sirens when voltage runs below a programmed setting, no more dead batteries after a call
- Sleep mode timer to shut the lights and siren off after a specific preset time if the ignition is turned off
- Horn-ring transfer allows you to effortlessly scroll through siren functions on the steering wheel without having to take your eyes off the road
- Built-in “park kill” to automatically turn light and siren functions off when the vehicle is put in park. This feature is also designed for positive or ground inputs so that “park kill” can also be activated by other inputs
- Built-in siren lock function that does not allow siren tones to come on until emergency lighting is activated
- Different size and shape buttons are quickly found allowing operation of all lights and siren functions without taking eyes off the road. Buttons are also backlit and change color.
- Programmable three level slide switch with aprogrammable fourth position
- Eight programmable auxiliary buttons (two can be programmed for positive or ground switching)
- Five programmable siren buttons (program different tones for each one)
- ArrowStik® can be programmed for different flash patterns and speeds, as well as the warning flash pattern itself
- Z3 amplifier special serial port needs only a simple data cable to connect to the Defender® and RX 2700™CC lightbars
- Banshee® siren amp compatible for additional features