Federal Signal’s 650 series siren allows for all sound and light functions to be enabled by rubberized push buttons located on the unit’s compact and easy to use microphone control head. Ten rubberized push buttons control three progressive “slide switch-like” positions, on/off, PA, Air Horn, Peak-and-Hold, tone switching, and up to 30-amps of additional auxiliary power.

The 650 series amplifier comes equipped with eight 10 amp light or auxiliary relay connections, is horn ring control ready, and has it’s own bracket mount to allow for quick and easy removal or replacement. This remote siren provides 100-watt speaker output and can operate from any 12-volt negative ground vehicle electrical system. 

  • Full featured 100-watt remote siren with PA light control 
  • Integrated microphone and switch controls in handset
  • Progressive push button control mimics slide switch action 
  • Eight 10-amp light and auxiliary relay postions

 

Technical Specs and Approvals

 

Input Voltage: 11VDC to 15VDC
Polarity: Negative Ground Only
Operating Temp.: -30°C to +65°C
Standby Current: < .22 amperes
Separating Current: 8 amps (nominal)
13.6V battery, 11 ohm load (no lamps on)
Frequency Range: 725 1550Hz
Voltage Output: 62-66V peak-to-peak
Dim. (L x W x H): Amplifier(without base) - 8.5 in x 5.5 in x 2.0 in
(21.6cm x 14.0cm x 5.1cm)
Control Head - 4.5 in x 2.0 in x 1.0 in (11.4cm x 5.1cm x 2.5cm)
Ship Weight: Control Head - 0.5 lbs (9.25 kg)
Siren - 6.5 lbs (3.0 kg)

 

Out of 5.0
Overall Rating