Purchase in Bulk:
Click here to find arm rests, cup holders, and more console accessories
C-PM-122 printer mount |
Overall measurements: 12.89" high x 12.5" wide x 38" long (including forward trim panel) |
See side view drawing min/max mounting depth allowed for control heads and/or options |
OEM tunnel plate must be removed |
Console only works in Super Duty XL and XLT models with Standard AM/FM Stereo |
If using console with a vertical gun rack between seats, a partition with gun alcove is recommended. there is 9.5" from end of console to Pro-gard a partition gun alcove. dual weapons mount not recommended because of lack of space |
Works with column shifter and OEM full length center console (OEM console must be removed, but the dash will have uncovered areas on the sides) dash parts to fill space can be ordered from Ford. rear OEM ductwork must also be removed and blocked off |
The console is not compatible in higher trim level trucks with 4 X 4-floor shifters, full-length center console, or with the 12" screen for Sync 3 with Voice-Activated Navigation or Sync 4 with Enhanced Voice Recognition |
Does not work with OEM manual transmission floor shifter |
Not compatible with OEM optional “Ultimate Trailer Tow Camera System with Pro Trailer Backup Assist” |
Now ships UPS |
3.3"W section now comes unpopulated |
Customize to your specific needs |
Includes equipment brackets and filler plates to enclose area |
See Havis 3.3" wide console accessories for options |
Gross weight: 47 lbs |